Desiccant

Desiccant dehumidifiers

Desiccant dehumidifiers operate without a motor. The principle of operation is based on the desiccant material that has the natural property of absorbing moisture particles from the air. Only desiccant dehumidifiers work 100% at low temperatures. They help a lot in heating the space.

Desiccant dehumidifiers performs 100% at low temperatures

Precisely because zeolite desiccants work without a compressor, they perform effectively at very low temperatures. Their dehumidifying capacity is unaffected in a temperature range of 1-37 ° C! This is the advantage of desiccant dehumidifiers: their effectiveness is not affected by the room temperature factor.
It is known that as a result of the economic crisis, seven out of ten permanent homes are not adequately heated or some areas are selectively heated. So in case the room temperature drops below 15 ° C, only a zeolite dehumidifier (desiccant) should be installed. Especially in vacation houses, uninhabited for a long time, without ventilation and heating!

Desiccant dehumidifier release hot air

At the same time, the Kullhaus and Meaco desiccant dehumidifiers have a thermal resistance inside, which heats the dry air before it is introduced into the space. Unlike motor dehumidifiers, Meaco desiccant dehumidifiers do not freeze room air, but instead raise the room temperature by 1-2 ° C, helping to heat it. The dry air released by the Meaco desiccant dehumidifier is about 10 ° C warmer than the existing room temperature!

Kullhaus DDQ10L desiccant dehumidifier
consistent performance at low temperatures, as low as 1°C.
equipped with ionizer and Activated Carbon Filter

KULLSAVE Energy Saving System

A great example of the extra detail you can get from a Kullhaus dehumidifier is the ever-evolving Kullhaus dehumidifier energy saving feature. With KULLSAVE you will have the best possible balance between efficient dehumidification and money saving. With the Humidity Adjustment key [Humid] adjust the relative humidity you want, ideally 50-55%. If the required humidity is higher than the room humidity, the humidity indicator light stays on and the Kullhaus DDQ10L desiccant will work for as long as it takes to reach the target. When the desired relative humidity is reached, the humidity light flashes, and the dehumidifier will enter energy saving mode: THE THERMAL RESISTANCE SHOWS IMMEDIATELY, and the FAN operates for 2 minutes (necessary time to cool the device). The device will be in sleep mode for 15 minutes. After a 15-minute pause, the fan will run for 2 minutes to check the relative room humidity. If the relative humidity has increased by about + 5% above the desired level, the Kullhaus DDQ10L zeolite dehumidifier will enter dehumidification mode. Otherwise, it goes into sleep mode for another 15 minutes, during which the fan stops and so on.

Desiccant dehumidifier work quietly

Precisely because the zeolite dehumidifier does not have a motor, is operating silently. Owners of motor dehumidifiers are immediately impressed by the low noise levels of the desiccant dehumidifier.

Desiccant dehumidifier reduce heating costs by 15-20%

When a room or house has high levels of relative humidity, what happens is that there are millions of water molecules in the air, which we only see when they condense on windows, walls and mirrors. We may not be able to see them, but they are there and we certainly feel them. To be able to feel warm, then you need to heat all these water molecules. In other words, heating a room with high humidity requires first of all the removal of water molecules in the air. That means that on the one hand it takes much longer to heat the house, and consequently much higher heating costs! Based on measurements and studies, by using a dehumidifier (thus drying the room air) we can reduce heating costs up to 15-20%.